Samurai KP1 Putty Primer Spray Paint 300mL

📌 Not available to East Malaysia (Sabah, Sarawak & Labuan)

PRODUCT FEATURES
– Essence is the same as the cement.
– Hide the scratches due to accidents.
– Protect and make you feel confident with your new look bike.

Tip for best performance:Surface like not smooth or with sand

Cause :
Putty is sprayed too thick, the layer is making the surface like very coarse or with sand.

Solution:
Rub the original layer of lacquer so that the surface feels smooth again, then recoat with colour and relacquer.
It is a liquid primer that comes in the form of spray can.

Directions for use:
1. Remove grease, dirt, rust, moisture or loose paint from the surface to be sprayed. Cover adjacent areas to protect from spray mist.
2. Shake can vigorously until metal agitator, moves freely for 1 minute. Remove plastic cap.
3. Hold can from a distance of 6-8″ and point nozzle towards object to be sprayed.
4. Press nozzle firmly and move spray back and forth to deposit an even film of paint.
5. Clean nozzle immediately after use by turning can upside down and pressing nozzle for 5 seconds or until no more paint emerges.
6. If clogging develops, pull nozzle off and clean with thinner. Gently replace nozzle with a twisting motion while holding can away from you.