5 Liter MCI Brush & Roller Eco Shield Exterior Paint Cat Putih Luaran Rumah (Copy)

𝗕𝗥𝗨𝗦𝗛 & 𝗥𝗢𝗟𝗟𝗘𝗥 𝗘𝗖𝗢𝗦𝗛𝗜𝗘𝗟𝗗

A water-based modified acrylic paint for exterior application on plastered wall, concrete, brick, gypsum board & etc. It provides adequate outdoor durability against tropical climate. It is a specially designed green product that has less of an environmental impact & less detrimental to human health. It is anti-algae, water resistant, good hiding & easy-to-apply, having dirt resistance property, making it ideal to be used in repainting works or housing projects where budget is of major concern.

𝗦𝗨𝗥𝗙𝗔𝗖𝗘 𝗣𝗥𝗘𝗣𝗔𝗥𝗔𝗧𝗜𝗢𝗡

Ensure the surface to be painted is clean, dry and free from dirt, oil, grease and other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen or algae must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Apply BRUSH & ROLLER Ecosealer 5400 where high alkalinity is present. Avoid painting where surface is high in moisture content or during wet weather (recommended painting specification requires moisture content of the wall to be below 16% as measured by protimeter and alkalinity of the wall below pH9).

Color: Assorted colors, refer Color Infinity color card

Film Finish: Low Sheen

Touch Dry: 30 minutes (depends on temperature and humidity)

Recoating Interval: 2 hours

Theoretical Coverage: 12 – 14 m² / litre / coat (actual coverage is dependent on loss factors)

No. of Coat: Minimum 2 coats (depends on color)

Application: Brush, roller, air spray or airless spray

Thinning: Use clean water, dilute up to 5% of water if necessary

𝗕𝗥𝗨𝗦𝗛 & 𝗥𝗢𝗟𝗟𝗘𝗥 𝗘𝗖𝗢𝗦𝗘𝗔𝗟𝗘𝗥 𝟱𝟰𝟬𝟬

a water-based alkaline resistance acrylic sealer for exterior & interior application on plastered wall, concrete, brick, gypsum board & etc. It serves as a protective barrier for the finishing topcoat against alkaline effects & moisture from the substrate. It is a specially designed green product that has less of an environmental impact & less detrimental to human health. It is water resistant, fast drying, good hiding & easy-to-apply, having good adhesion property and ideal for use in repainting works or fast-track projects where fast completion of works is of major concern.

𝗦𝗨𝗥𝗙𝗔𝗖𝗘 𝗣𝗥𝗘𝗣𝗔𝗥𝗔𝗧𝗜𝗢𝗡

Ensure the surface to be painted is clean, dry & free from dirt, oil, grease & other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen, algae or fungus must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty.

📌NOTE

The colours shown here are as close to actual paint colours as modern printing techniques allows. Due to different computer monitors/calibrations colours may vary slightly from the picture.