Masa pemprosesan pesanan 24 jam

1 Liter SKK SK Gloss Undercoat for Wood Undercoat Cat Kayu

RM50.00

📌 Limit to West Malaysia only.Description:SK Gloss Undercoat is a quick-drying, oil-modified alkyd based undercoat which is specially formulated for primed metal, woodwork and previously painted surfaces. This undercoat promotes excellent hiding power, brush ability, and acts as a sound base and good adhesion prior to painting the SK Gloss.Surface Preparation:Ensure that the surfaces to be painted are dry and free from dirt, grease and other contaminants. For previous painted surfaces, scrape off the loose and flaking paint film. Defective areas should be sanded and smoothened. For metal surfaces, remove rust thoroughly from ferrous substrate by wire brushing. Then, smoothen the surface with sandpaper. Finally clean and dry it.Application Data:Touch Dry: 2 hoursHard Dry: 6 hoursRe-coating Interval: 8 hoursTheoretical Coverage: 5.00-6.67m² per liter per coatNo. of Coat: 1 coatDirection for Use:- Stir well before use. Application can be done by brush, roller or sprayed on.- If necessary, thin down with max. 10% of thinner.- Allow 8 hours drying before re-coating.- Clean up all equipment immediately after use.Pack Size: 1 Litre & 5 Litre📌NOTEThe colours shown here are as close to actual paint colours as modern printing techniques allows. Due to different computer monitors/calibrations colours may vary slightly from the picture.


18 in stock

Category: SKU: SKUC-1L

📌 Limit to West Malaysia only.Description:SK Gloss Undercoat is a quick-drying, oil-modified alkyd based undercoat which is specially formulated for primed metal, woodwork and previously painted surfaces. This undercoat promotes excellent hiding power, brush ability, and acts as a sound base and good adhesion prior to painting the SK Gloss.Surface Preparation:Ensure that the surfaces to be painted are dry and free from dirt, grease and other contaminants. For previous painted surfaces, scrape off the loose and flaking paint film. Defective areas should be sanded and smoothened. For metal surfaces, remove rust thoroughly from ferrous substrate by wire brushing. Then, smoothen the surface with sandpaper. Finally clean and dry it.Application Data:Touch Dry: 2 hoursHard Dry: 6 hoursRe-coating Interval: 8 hoursTheoretical Coverage: 5.00-6.67m² per liter per coatNo. of Coat: 1 coatDirection for Use:- Stir well before use. Application can be done by brush, roller or sprayed on.- If necessary, thin down with max. 10% of thinner.- Allow 8 hours drying before re-coating.- Clean up all equipment immediately after use.Pack Size: 1 Litre & 5 Litre📌NOTEThe colours shown here are as close to actual paint colours as modern printing techniques allows. Due to different computer monitors/calibrations colours may vary slightly from the picture.

Berat 2.0 kg
Dimensi 15.0 × 15.0 × 15.0 cm
Jenama

Cat SKK

Ulasan

Tiada ulasan lagi.

Be the first to review “1 Liter SKK SK Gloss Undercoat for Wood Undercoat Cat Kayu”

Alamat e-mel anda tidak akan disiarkan. Medan yang diperlukan ditanda *

Kedai Cat