BARU

4KG & 16KG KEMCES K-MIX 688 Multi Elastomeric Waterproofing

KEMCES MIX 688 MULTI MIX ELASTOMERIC WATERPROOFING 4KGMIX WITH POLAND CEMENT RATIO 1 : 1.2KG CEMENT , Same usage like SIKA 109 / BOSCOLASTIC / MAPELASTIC ETCK-MIX688 is a Multi-Mix Elastomeric Waterproofing with fibre-reinforced and specially modified high grade acrylic polymer. K-MIX 688 is versatile, by modifying the mixing ratios and can used for other applications to provide superior water protection for concrete surfaces.FEATURES* Flexible* Fibre Reinforced* UV Resistant* Tintable (Color)* Bridge hairline cracks* Minimize painting cost* Paintable* High Water Vapor Transmission* Most compatible to concrete substrateUSES* Waterproofing* Grouting* Tile Adhesive* Colored waterproofing for wall* Tile-to-Tile Adhesive* Paint Primer* Waterproofing Primer* Keying AidsAPPLICATION AREA* Fish Pond* Bathroom* Balconies* Concrete Wall & Floor* Swimming Pool* Pool Deck* Slab* Water Tank* Planter Box* R.C. GuttersMIXING* 1.2kgs Portland cement for every 1kg of K-MIX 688* Put the liquid in a clean mixing container and slowly add the powder component whilst stirring. using a slow speed (500-600 r.p.m.) heavy duty electric drill with a suitable paddle. Mix until homogeneous slurry is obtained and make sure that no unmixed powder is left at bottom of the container.SUBSTRATE PREPARATION1) Clean or remove all laitance, dust, oil, contaminants and previous coatings.2) Void, Honeycomb, bugholes, rockpocket, surface pitting shall be filled and patched before application.3) Wet the application area with water until water absorption is none to minimal with no water ponding(Saturated Surface Dry-SSD)4) Brush on 1 coat of K-MIX 688 primer (1 part K-MIX 688: 3 parts Water) to the substrate to ensure all pores are sealed off.APPLICATION METHOD1) After primer, prepare K-MIX 688 mixture follow by measuring area:2) Apply the prepared K-MIX 688 mixture by brush over the measure area, to serve as the first coat.3) Allow 1-2hours to cure before applying second coat (opposite direction with first coat)4) Let dry for 24hours before flood testing.5) Concrete topping is recommended for regular traffic areas.

SAIZ

Jelas

Categories: ALL, WaterproofingSKU: K-MIX688

KEMCES MIX 688 MULTI MIX
ELASTOMERIC WATERPROOFING 4KG

MIX WITH POLAND CEMENT RATIO 1 : 1.2KG CEMENT , Same usage like SIKA 109 / BOSCOLASTIC / MAPELASTIC ETC

K-MIX688 is a Multi-Mix Elastomeric Waterproofing with fibre-reinforced and specially modified high grade acrylic polymer. K-MIX 688 is versatile, by modifying the mixing ratios and can used for other applications to provide superior water protection for concrete surfaces.

FEATURES
* Flexible
* Fibre Reinforced
* UV Resistant
* Tintable (Color)
* Bridge hairline cracks
* Minimize painting cost
* Paintable
* High Water Vapor Transmission
* Most compatible to concrete substrate

USES
* Waterproofing
* Grouting
* Tile Adhesive
* Colored waterproofing for wall
* Tile-to-Tile Adhesive
* Paint Primer
* Waterproofing Primer
* Keying Aids

APPLICATION AREA
* Fish Pond
* Bathroom
* Balconies
* Concrete Wall & Floor
* Swimming Pool
* Pool Deck
* Slab
* Water Tank
* Planter Box
* R.C. Gutters

MIXING
* 1.2kgs Portland cement for every 1kg of K-MIX 688
* Put the liquid in a clean mixing container and slowly add the powder component whilst stirring.
using a slow speed (500-600 r.p.m.) heavy duty electric drill with a suitable paddle.
Mix until homogeneous slurry is obtained and make sure that no unmixed powder is left at bottom of the container.

SUBSTRATE PREPARATION
1) Clean or remove all laitance, dust, oil, contaminants and previous coatings.
2) Void, Honeycomb, bugholes, rockpocket, surface pitting shall be filled and patched before application.
3) Wet the application area with water until water absorption is none to minimal with no water ponding(Saturated Surface Dry-SSD)
4) Brush on 1 coat of K-MIX 688 primer (1 part K-MIX 688: 3 parts Water) to the substrate to ensure all pores are sealed off.

APPLICATION METHOD
1) After primer, prepare K-MIX 688 mixture follow by measuring area:
2) Apply the prepared K-MIX 688 mixture by brush over the measure area, to serve as the first coat.
3) Allow 1-2hours to cure before applying second coat (opposite direction with first coat)
4) Let dry for 24hours before flood testing.
5) Concrete topping is recommended for regular traffic areas.